INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO XL-G11S.X / BFG
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO XL-G11S.X / BFG
16
17
3 Installation
3.1 Safety and Transport
3 Installation
3.2 Preparation of installation
Note! Module damage may occur!
Do not stack modules.
Note! Module damage may occur!
Do not install modules near flammable gas / vapors.
Do not install modules in close proximity to air condi-
tioning systems.
Note! Module damage may occur!
Do not drop modules.
Note! Module damage may occur!
Only make modifications to the module which have
been confirmed in writing by Qcells.
confirmation
letter
Note! Module damage may occur!
Never lift or move the module with the connection
cables or junction box.
Carry modules upright and horizontally as shown.
Note! Module damage may occur!
Never step on modules.
Do not subject modules to any mechanical stress.
Do not allow any objects to fall onto modules
Danger! Risk of fatal injury due to electric shock!
Block off the installation zone.
Keep children and unauthorized individuals away
from the solar power system.
Danger! Risk of fatal injury due to electric shock!
Ensure that modules and tools are not subject to
moisture or rain at any time during installation.
Warning! Risk of injury due to falling modules!
Secure modules during installation.
Do not install modules in windy or wet weather.
Danger! Risk of fatal injury due to electric shock!
Only use dry, insulated tools.
Do not carry out the installation alone.
■
Only install undamaged modules and components.
Do not modify the module
(e.g. do not drill any additional holes).
