1. Uncrating instructions are located in this envelope.
Remove and read the instructions.
Go To Step 3.
Crate with
Carton and
Wooden
Frame
Go To Step 6.
Crate with
Carton Only
2. For crate with wooden frame continue with Step 3.
For crate with carton only, go to Step 7.
3. Locate the six (6) Phillips screws in the bottom front
and back horizontal boards.
Remove
X3
Remove
X3
4. Remove all six (6) screws.
Three (3)
Screws in Front
Three (3)
Screws in Back
Weights
Crate with Carton Only
Crate with Carton and Wooden Frame
Shipping Weight (Approximate):
182 kg (402 lb)
227 kg (500 lb)
Machine Weight:
172 kg (379 lb)
172 kg (379 lb)
Tools Required
Medium Phillips Screwdriver (Crate with Wooden Frame Only)
Flat Blade Screwdriver
Pry Bar
(Crate with Wooden Frame Only)
Ratchet and 15 mm (9/16”) Socket
Small Ladder or Step Stool
Band Cutter
Utility Knife
Fork Lift*
* A fork lift or other mechanical lifting device is recommended for use in moving the crated tester to the
installation location, and to lift the frame in one piece from the crate with wooden frame.
14
Section 5. Uncrating