19
Section 6. Set Up
6.2 Electrical (Jun 2022)
Specifications
Voltage
All Models
230 V or 208 V ± 10% - single phase
Current
23 A @ 230 V, 24 A @ 208 V
Frequency
50 or 60 Hz
Installation
Rated as Installation (Over voltage) Category II for transient over voltages.
SCCR*
1000 A
* S
hort
C
ircuit
C
urrent
R
ating
Figure 6.2a: Electrical Specifications
Voltage
●
The Q-SUN Xe-2 comes in 208 V single phase or 230 V single phase (
).
●
The voltage is specified when the tester is ordered.
●
The input voltage and current rating are shown on the nameplate at the rear of the tester (
).
●
The voltage supplied to the tester must be within ±10% of the voltage rating of the tester and the circuit must be
capable of supplying the rated current.
Connections
A power plug IS NOT SUPPLIED with Q-SUN Xe-2 testers. The user must supply
and attach a properly-sized plug to connect the Xe-2 to the Main Power Supply.
●
Q-SUN Xe-2 testers are provided with a 3 conductor, 10 AWG, ≈ 4.5 m (15') long power cord without plug.
●
A qualified electrician should make all electrical connections.
Q-SUN Xe-2
Rear View
Nameplate
Power
Cord
(Plug Not
Supplied)
Q-SUN XE-2-HS
22-1832-79-X2HS
Figure 6.2b: Tester voltage and current shown on nameplate.