Q-See
SuperDVR & 8PCRP/8PCDP/16PCRP
User Manual
18
7.
Motion Detection
By selecting this option, users can set the selected channels to record when
motion is detected in front of the camera.
8.
Motion Record Frame Rate
Select recording frame rate for Motion Detection record mode.
9.
Sensor Record Frame Rate
If sensors are utilized to trigger recording, users can select recording frame
rate here.
NOTICE: Users can select more than one record mode.
10. Camera Security
Users are divided into three types: Normal user, Power user and Administrator.
By selecting this option, only administrators can see the selected channels.
11. Record Quality
Select recording image quality here.
12. Audio in
SuperDVR 6.0 can support one channel of microphone audio input signal on
the PC motherboard and any audio inputs that are on the card if any. Users
can choose one video channel for each available audio input.
3.3.3 Record Status Panel
Figure3-6 Record Status Panel & Alarm Output Status Panel
Meanings of indicator light colors in row one are shown below:
•
Grey light: Normal State
•
Light Green light: Manual Record State
•
Dark Green light: Schedule Record State
•
Yellow light: Motion Detection Record State
•
Red light: Sensor Alarm Record State
•
Blue light: Video Loss State
When the indicator light color turns into red
in row two, it means there is
an alarm output.
