background image

54

55

CHAPTER 6  DVR MANAGEMENT

EVENT INFORMATION

This window lists recorded events. This list can be searched by date, time, type of event and 
channel.

PICTURE 6-4

PICTURE 6-5

LOG INFORMATION

This window lists user activity within the system.

This record can be searched by type of operation, date and time, and etcetera. It can also be 
exported to external USB storage devices using the backup function.

NETWORK INFORMATION

This window shows the status of the DVR on the network including its assigned port, and 
other networking configurations.

PICTURE 6-6

ONLINE USER INFORMATION

Information on remote users currently connected is displayed in this window.

PICTURE 6-7

Refresh

 – Updates the list of online users

Disconnect 

– The Administrator can disconnect a selected user from the DVR. That PC will 

not be able to access the device for five minutes thereafter.

6.2 MANUAL ALARM

This displays the configuration of the manual alarm.

PICTURE 6-8

PICTURE 6-9

6.3 DISK MANAGEMENT

This window displays information on the drive mounted within the DVR including size, available 
space and status.

The drive can be set to read only, which will disable recording, but will preserve the data 
currently stored within it.
If you have upgraded your system by installing a new drive (

See Chapter 7

) you will need to 

first format the new hard disk before recording. You can reformat the current drive if desired.

WARNING!

 

Reformatting the drive will delete all recorded files stored on the 

hard disk regardless of whether they are Locked!

Refresh

 will update the information about the drive. 

Summary of Contents for QT454-403-5



































Reviews: