User’s manual of remote client software
Fig 2.5.49
For the same channel, it can be setup only once in none second output area. If you want to
second output, you can setup second output in the right list. Right click decode and select “for
second output”. Here, the configuration of related output can be clear after you click “clear
output” menu, show as picture above.
Fig 2.5.50
After select second output, you can setup the second output configuration. Here the channels and
image resolution in each area of each second output are the same to the channels and image
resolution in each area of each none second output. And the channel for first play only can be
added into the first line to make second output.
Fig 2.5.51
Right click the information with D1 icon in the list, click “delete” menu to cancel the second
output. Click “select camera” menu, and display the channel that be allowed second output in this
cycle, select second output in the popup interface and setup finish.
In the hardware decode mode, the button in the preview interface will disable, but the display
screen can be modified in the hardware decode configuration interface. The software support 1,4,9
- 59 -
