3
Installing the chimney and pipes:
Install the 2 sections of chimney on the base of the unit, none of them will have the
damper. Interlock the stove pipe so they lock into place and are even at the edges. Fit the
longer section to the screened section. When assembling the chimney pipe, it will be
necessary to bend and roll the sections to help adjust the metal lips accordingly. Don’t
worry about the pipes becoming not perfectly round. You can roll them circular again.
Attach the 3 screws
through the tabs into
the deflector disk.
Then attach the long
section of stove pipe
to the completed
screened
section.
Place the top stack
onto
the
heater
assembly.
