© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Specification subject to change.
Rev-03-08-21
INSTALLATION
FLEX Light - FLEX Dome
NOTES:
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
Extrusions - Requirements and Cautions for Installation
For fixtures with Screw Connectors (Clasp Connector and Sleeve Connector also refer to the following cautions)
Ensure the supply cord is not subject to mechanical stress.
Keep
0.39”-0.79”
distance between the end of aluminum profile and that of aluminum mounting p iece.
0.39”-0.79”
0.39”-0.79”
0.39”-0.79”
0.39”-0.79”
Mechanical stress on front con nector cable shall be avoided.
PULL
It is forbidden to curl or pull the f ront conne ctor cable
wi th excessive force.
PULL
<0.39”
The space bet wee n aluminum profile and aluminum mounting
piece less than 0.39” is forbidden.
It is forbidden to let any connector aluminum mounting piece
on the aluminum profile a nd make light defo rmation.
Install light in one directio n. Don't let it choke in middle.