© 2020, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - sales@q-tran.com - www.q-tran.com
2020-04-08-V1
CLASS:
3425 - 15
3425 - 95
LOW VOLTAGE LIGHTING SYSTEM &
LANDSCAPE LIGHTING SYSTEMS
3402 - 15
3402 - 95
PROJECT NAME
DATE
TYPE
NOTE
COMPANY
1
WIRE LENGTH TABLE
*
Distances are based on a 5% Voltage drop max.
● This product must be installed in accordance with the applicable installation code by a person familiar with the
construction and operation of the product and the hazards involved.
2 Secondary Voltage
3 Control
4 Housing
Ordering Example
ORDERING GUIDE
QOM-DRIVE
-
+
-
-
Model
Size Sec. V Control
Housing
1
2
3
4
12V
DC
DMX
DALI
24V
DC
120
W
100
W
200
W
2X60W
1X100W
2X100W
12VDC
24VDC
24VDC
1.05A
2.10 A
0.45A
0.90A
2.10A
0.90A
60
W
1X60W
12VDC
1.05A
0.45A
QOM-DRIVE-100-24V+DMX
1 Size
Max Load
Secondary
Max Prim.
Max Prim.
(Watts)
Voltage (12/24VDC)
Amps @ 120V
Amps @ 277V
BK
Black Powder Coat
Finish ( Standard )
SS
316 Marine Grade
Stainless Steel
The Q-Tran QOM-Drive with available DMX or DALI control and dimming options, is an ideal
solution for nearly all interior or exterior color changing lighting applications.This electronic
outdoor power supply, utilizes eldoLED LINEARdrive drivers and is suitable for indoor and
outdoor use, in 12VDC or 24VDC constant voltage options, and is capable of up to 200 Watts of
flicker free power within a single enclosure.The QOM-Drive comes pre-wired to meet any need,
with terminal blocks for all input and output connections to greatly reduce installation time.
DALI
Use these connectors to connect the driver to a DALI network. Always combine
a DA+ and DA- connector
for either data input or data output. A separate DALI power supply is required to power the DALI bus.
DMX in/LedSync out
Use these connectors when the driver is used in a DMX network. For DMX in,
connect the network
cable’s DMX+, DMX- and DMX shielding wire (the orange/white, orange and brown wire in a CAT5 cable)
to the DMX in+, DMX in- and DMX in shield connector respectively. For LedSync out, connect the network
cable’s DMX+, DMX- and DMX shielding wire to the LedSync out+, LedSync out- and LedSync shield
connector respectively. DMX shielding wire must be grounded to Earth ground external to power supply.
FEATURES
●
DMX or DALI controllable
● Surface mount capable
● Suitable for dr
y, damp and wet locations
● Suitable for indoor or outdoor use
●
4x 12/24V controllable outputs per driver
●
Standby power: < 0.5W
●
Built-in surge protection: 3kV (L to N), 4kV (L/N to GND)
Low Voltage Lighting Systems
: CSA class 3425-15 and class 3425-95
: CSA standard C22.2 No. 250.0-08 - Luminaires
: ANSI/ UL standard 2108 - Low voltage lighting systems
: ANSI/ UL standard 8750 - Light emitting diode (LED) equipment for use in lighting products
: CSA Std C22.2 No 250.13-14 - Light emitting diode (LED) equipment for lighting applications
LED Landscape Lighting Systems
: CSA class 3402-15 and class 3402-95
: CSA standard C22.2 No. 250.7-07 - Extra-Low-Voltage Landscape lighting systems
: ANSI/ UL standard 1838 - Low voltage landscape lighting systems
: ANSI/ UL standard 8750 - Light emitting diode (LED) equipment for use in lighting products
: CSA Std C22.2 No 250.13-14 - Light emitting diode (LED) equipment for lighting applications
●
Flicker free operation
●
Efficiency: 90% at full load,
≥ 87% above 50W output
●
Class 2 output
●
Power factor: > 0.94
●
THD @ full load : <10%
●
3 year warranty
● CSA #239924
QOM-DRIVE
DALI
DMX
Watts
(W)
12
315’ 198’ 125’ 78’ 49’ 31’ 19’ 12’ 7’
25
115’ 72’ 45’ 28’ 18’ 11’ 7’ 4’ 4’
60
7’ 4’ 3’
17
897’ 564’ 355’ 223’ 140’ 88’ 55’ 35’ 22’
25
567’ 356’ 224’ 141’ 88’ 56’ 35’ 22’ 14’
40
309’ 194’ 122’ 77’ 48’ 30’ 30’ 12’ 7’
80
130’ 82’ 51’ 32’ 20’ 13’ 8’ 5’ 3’
100
84’ 53’ 33’ 21’ 13’ 8’ 5’ 3’
VOLTAGE DROP CHART
VDC
12
24
10 AWG 12 AWG 14 AWG 16 AWG 18 AWG 20 AWG 22 AWG 24 AWG 26 AWG
(5.6mm
Р
) (3.3mm
Р
) (3.0mm
Р
) (1.3mm
Р
) (0.78mm
Р
) (0.50mm
Р
) (0.33mm
Р
) (0.20mm
Р
) (0.13mm
Р
)
14.5"
15.4"
9.22"
PRIMARY
SECONDARY
eldoLED POWERdrive 100/S
M
_
+
120-277VAC
50-60Hz
DA
-
+
DA
-
+
~
~
1
2
eldoLED POWERdrive 100/S
M
_
+
120-277VAC
50-60Hz
DA
-
+
DA
-
+
~
~
1
2
W B G R +24
A
W B G R +24
B
A
B
DMX IN
DMXOUT
NEU
GND
HOT
1.07"
1.36"
4.90"
5
Knockouts of
1.07"
Hole for
3/4"
fitting
4
Knockouts of
1.36"
Hole for
1"
fitting
