QOM-eLED+DALI-DT8
LED POWER SUPPLY 100W–300W
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Specification subject to change. Rev-11-15-22
COMPLIANT
•
Limited output voltage and current, plus isolation for safe operation
•
Controllable by DALI 2 protocol
•
DALI dimming down to 0.5%
•
Fully potted driver(s) for moisture resistance
•
Suitable for dry, damp, and wet locations
•
Suitable for use with submersible luminaire
•
Surface mount only
•
Primary voltage - universal (120-277V)
•
Wide operating temperature range: -4
˚
F to 122
˚
F
•
Fits up to (3):100W 24 VDC driver(s) and DALI decoder module(s)
•
5 years warranty
•
Driver has Class A sound rating
•
Class 2 output
•
CSA #239924
Low Voltage Lighting Systems
: CSA Class 3425-15 and Class 3425-95
: CSA Standard C22.2 No. 250.0-08 - Luminaires
: ANSI/ UL Standard 2108 - Low Voltage Lighting System
: ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products
: CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications
Landscape Lighting Systems
: CSA Class 3402-15 and Class 3402-95
: CSA Standard C22.2 No. 250.7-07 - Extra-Low-Voltage Landscape Lighting Systems
: ANSI/ UL Standard 1838 - Low Voltage Landscape Lighting Systems
: ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products
: CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications
14.5"
15.4"
9.22"
R G B W+24 R G B W+24 R G B W+24
DALI
OUT
NEU
HOT GND
DALI
IN
LED DRIVER
(120V - 277V)
LED DRIVER
(120V - 277V)
LED DRIVER
(120V - 277V)
BOTTOM TRAY
PRIMARY
SECONDARY
BOTTOM
1.07"
1.36"
4.90"
TOP TRAY
5
Knockouts of
1.07"
Hole for
3/4"
fitting
4
Knockouts of
1.36"
Hole for
1"
fitting
V-
V-
V+
V+
+
R-
G-
B-
W-
D1+
D2+ D1-
D2-
12-36VDC IN
LED groups
DALI Signal
in/out
V-
V-
V+
V+
+
R-
G-
B-
W-
D1+
D2+ D1-
D2-
12-36VDC IN
LED groups
DALI Signal
in/out
V-
V-
V+
V+
+
R-
G-
B-
W-
D1+
D2+ D1-
D2-
12-36VDC IN
LED groups
DALI Signal
in/out
Housing
•
18 gauge welded steel enclosure: 15.4"L x 9.22"W x 4.90"D
•
Door: 14.5"L x 9.27"W
•
Knockouts: 9
•
Built-in support bracket incorporated to secure housing for surface
mounting
Performance
•
Power Supply
: Rated for surface mount or outdoor use
: Fully rated to operate low voltage load at listed wattage (No derating
required)
: Voltage regulation to 2% or less of rated output voltage
: The ability to be dimmed using DALI 2 DT-8 dimming
: Universal input range of 120-277 Vrms
•
Low Voltage Lighting Systems
: CSA Class 3425-15 and Class 3425-95
•
LED Landscape Lighting System Components
: CSA Class 3402-15 and Class 3402-95
: Short circuit protection (SCP)
: Over voltage protection (OVP)
: Over current protection (OCP)
: Live tested by the manufacture to ensure proper operation
: Manufacturer offers a minimum of 5 years warranty
•
Terminal blocks is made of tin plated copper with a voltage rating of 300V
and a current rating of 40A
