DMX in/LedSync out
Use these connectors when the driver is used in a DMX network. For DMX in, connect the network
cable’s DMX+, DMX- and DMX shielding wire (the orange/white, orange and brown wire in a CAT5
cable) to the DMX in+, DMX in- and DMX in shield connector respectively. For LedSync out, connect
the network cable’s DMX+, DMX- and DMX shielding wire to the LedSync out+, LedSync out- and
LedSync shield connector respectively. DMX Shield must be grounded to Earth Ground at a single
point external to power supply
BOTTOM
BK
Black Powder Coat
SS
316 Marine Grade
Stainless Steel
Finish ( Standard )
1.07"
1.36"
4.90"
M
-
+
M
-
+
M
-
+
TOP TRAY
5
Knockouts of
1.07"
Hole for
3/4"
fitting
4
Knockouts of
1.36"
Hole for
1"
fitting
14.5"
15.4"
9.22"
HOUSING
●
18 gauge Welded Steel Enclosure: 9.22"W x 15.4"H x 4.90"D
● Door: 9.27"W x 14.5"H
● K
nockouts: 9
● Built-
in support bracket incorporated to secure housing for surface mounting
FEATURES
●
Limited output voltage and current, plus isolation for safe operation
● F
ully potted driver(s) for moisture resistance
● Controllable with DMX decoder module
● Control 4 LED channels with DMX
● Surface mount only
● Suitable for dr
y, damp and wet locations
● Suitable for Use with Submersible Luminaire
● Primary Voltage - Universal (120-277V )
● Wide operating temperature range:
-4 degF to 122 degF
● F
it
s up to (3):100W 24 VDC driver(s) and DMX decoder module(s)
● Driver has Class A sound rating
● DMX dimming down to 0%
● Class 2 Output
● 5 year warranty
Low Voltage Lighting Systems
: CSA Class 3425-15 and Class 3425-95
: CSA Standard C22.2 No. 250.0-08 - Luminaires
: ANSI/ UL Standard
2108 - Low V
oltage Lighting Systems
: CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications
: ANSI/ UL Standar
d 87
50 - Light Emitting Diode (LED) Equipment for Use in Lighti
ng Pr
oducts
LED Landscape Lighting Systems
: CSA Class 3402-15 and Class 3402-95
: CSA Standard C22.2 No. 25
0.7-07 - Extra-Low-Voltage Landscape Lighting Systems
: ANSI/ UL Standard
1838 - Low Voltage Landscape Lighting Systems
: CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications
: ANSI/ UL Standar
d 87
50 - Light Emitting Diode (LED) Equipment for Use in Lighti
ng Pr
oducts
+
24
DMX
QOM-eLED
U
NV
2 Primary Voltage
UNV: 120-277 Vrms
3 Secondary Voltage
24VDC
DMX
DMX
Opts
Size
Model
Prim. V
Sec. V
Max Prim.
@ 277V
1 Size
Max Load
(Watts)
Max Prim.
Amp
s
@ 120V
Max Prim.
Amp
s
@ 277V
Secondary
Voltage(24VDC)
4 DMX
5 Options
QOM-eLED-100-UNV/24+DMX
Ordering Example
ORDERING GUIDE
BOTTOM TRAY
PRIMARY
SECONDARY
LED DRIVER 2
(120V - 277V)
LED DRIVER 1
(120V - 277V)
LED DRIVER 3
(120V - 277V)
NEU
GND
HOT
W B G R+24 W B G R+24
W B G R+24 DMX
24VDC
24VDC
24VDC
0.95 A
1.90 A
2.85 A
0.40 A
0.80 A
1.20 A
1x100W
2x100W
3x100W
100W
200W
300W
© 2019, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - sales@q-tran.com - www.q-tran.com
QOM-eLED+DMX
1
