QTM-eLED+DALI-DT6
LED POWER SUPPLY 100W–300W
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Specification subject to change. Rev-11-15-22
COMPLIANT
Part Number Builder
QTM-eLED+DALI-DT6 is an LED power supply for DALI 2 applications.
It utilizes a 100W constant voltage LED Driver from Thomas Research
and DALI 2 DT-6 Decoders. The unit is available in 100-300 watt
capacity. The power supplies and decoders are all prewired together
along with terminal blocks for power and control wires. The housing
can be recessed or surface mounted.
Technical Information
QTM-eLED
UNV
24VDC
DALI-DT6
WH (Standard)
BK
100W
200W
300W
2-Wire
3-Wire
N/A
N/A
2-Wire
3-Wire
2-Wire
3-Wire
N/A
2-Wire
3-Wire
2-Wire
3-Wire
2-Wire
3-Wire
1
Size
Size
Max Load
(Watts)
Secondary
Voltage
(12/24VDC)
Max Prim Amps
@ 120V
Max Prim Amps
@ 277V
100W
1x100W
24VDC
0.95A
0.40A
200W
2x100W
24VDC
1.90A
0.80A
300W
3x100W
24VDC
2.85A
1.20A
Voltage Drop Chart
VDC
Watts
(W)
10 AWG
(5.6mm2)
12 AWG
(3.3mm2)
14 AWG
(3.0mm2)
16 AWG
(1.3mm2)
18 AWG
(0.78mm2)
20 AWG
(0.50mm2)
22 AWG
(0.33mm2)
24 AWG
(0.22mm2)
26 AWG
(0.13mm2)
24
17
25
40
80
100
897'
567'
309'
130'
84'
564'
356'
194'
82'
53'
355'
224'
122'
51'
33'
223'
141'
77'
32'
21'
140'
88'
48'
20'
13'
88'
56'
30'
13'
8'
55'
35'
30'
8'
5'
35'
22'
12'
5'
3'
22'
14'
7'
3'
*Distances are based on a 5% Voltage drop max.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
Product
Prim. V
Sec. V
Control
Color
3
Size
1
Output Wiring 1
2
Output Wiring 2
2
Output Wiring 3
2
2
Output Wiring Options
2-Wire Light Engines:
SW, SW-HE, SW-HE+, SD-SW, SC, WD
3-Wire Light Engines:
DW, DW-HE
3
Color
WH:
White (Standard)
BK
:
Black Powder Coat Finish
NOTE:
2-Wire default is 1 address
3-Wire default is 2 addresses
For customization or pre-programming contact a local sales rep.
DALI commissioning to be performed by a third party at time of installation.
