INSTALLATION
LED POWER SUPPLY - QTM-eLED+DMX
© 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Specification subject to change. Rev-10-07-21
•
Must be installed by licensed electrician.
•
Installation must be in accordance with DMX512-A standard
•
DMX Shield must be grounded to Earth Ground at a single point external to power supply
•
Wear rubber shoes and work on a sturdy wooden or fiberglass
ladder.
•
This power supply must be installed according to the National
Electric
•
Code and local codes and ordinances.
•
This power supply is to be installed and serviced only by an licensed
electricians.
•
This power supply is to be installed so that it is not likely to be
contacted by people.
•
To avoid a hazard to children, account for all parts and destroy all
packaging materials.
•
Do not install in wet locations.
LOW VOLTAGE LIGHTING SYSTEM
CLASS:
3425-15
3425-95
COMPLIANT