- 8 -
Temperature
Cooling system
fans with temperature-controlled speed
Interface and connections
Indicators
For each output: 5 x LEDs for mute, load, signal, levels and limit/clip
information
Interface
5" TFT-Touch screen
Output connectors
4 Neutrik® NL4
1 PA-COM® 8-Ponit
etherNet
2 x 1 Gb/s RJ45 etherCON ®
Connectors
Input
4 Neutrik® female XLR3
Link
4 Neutrik® male XLR3
Available input connectors vs. input mode
Analog AB / Analog CD
IN A, IN B / IN C, IN D (4 connectors, 4 channels)
Digital AB / Digital CD
IN A&B / IN C&D (2 connectors, 4 channels)
Link connectors
Analog input mode
Passively connected
Digital input mode
Electronically buffered, fail safe relay
Analog input mode
Input impedance
22 kΩ (balanced)
Maximum input level
15.5 dBu (balanced, THD 1%)
A/D conversion
32-bit analog/digital converters (120 dB dynamic range)
Digital input mode / Supported operating mode
Standards
AES/EBU (AES3)
Sampling frequency (Fs)
44.1, 48, 88.2, 96, 176.4 or 192kHz
Word length
16, 18, 20 or 24 bits
Synchronization
Signal resampled to internal clock at 96kHz
Input gain
Range
-80 dB to +15 dB
Steps
0.1 dB
Remote control and monitoring
Network connection
Dual-port Ethernet Gigabit interface
Remote control software
VDA Control
