CAUTIONS AND WARNINGS
As with any thermometer, proper technique is crucial to getting accurate temperature readings.
Please read this manual thoroughly and carefully before using.
Always operate the thermometer in an operating temperature range 50°F to 104°F (10°C to 40°C),
and relative humidity less than 95%.
Always store the thermometer in a cool and dry place: temperatures between -4°F to 140°F (-20°C
to 60°C); relative humidity less than 95%.
Avoid direct sunlight.
Avoid dropping
the thermometer.
Do not
disassemble the thermometer.
Basic safety precautions should always be observed, especially when the thermometer is used on
or near children and disabled persons.
This thermometer is not intended to be a substitution for a consultation with your physician. The
forehead scan temperature serves as a
reference only. It cannot be a judgment on fever.
Do not use if thermometer has suffered damage.
Do not place it on the fireplace, or near heating/cooling sources.
Do not touch the lens.
IMPORTANT SAFETY INSTRUCTIONS
READ THIS BEFORE USING AND KEEP THESE INSTRUCTIONS
The following basic safety precautions should always be taken.
1. Close supervision is necessary when the thermometer is used by, on, or near children, handicapped
persons or invalids.
2.
Read this manual thoroughly and carefully prior to using.
Use the thermometer only for the
intended use described in this manual.
3. Do not use the thermometer if it is not working properly, or if it has suffered any damage.
4. Do not use accessories which are not supplied or recommended by the manufacturer.
5. Proper maintenance is essential to the longevity of your device. If you are concerned about your
accuracy of measurement, please contact the local customer service or place of purchase for help.
6. This device is a precision optical thermometer. Handle carefully and do not drop. Do not use if
thermometer has suffered damage.
7. This device is a non-sterile device. Do not use ethylene oxide gas, heat, autoclave, or any other
harsh methods to sterilize the device.
Thank you for choosing TD-1261 Forehead thermometer. This innovative medical device relies on
advanced infrared (IR) technology to measure temperature instantly and accurately through the
surface of the skin over the forehead. TD-1261 Forehead thermometer is an elegantly designed
infrared thermometer meant for your family.
INTRODUCTION
TD-1261 thermometer is an infrared thermometer intended for the measurement of human body
temperature in people of all ages without contact to the body and may be used by medical
professionals or by consumers in a home environment.
INTENDED USE
The thermometer measures the infrared heat generated by the surface of the skin over the temporal
artery. The thermometer then converts it into a temperature value shown on LCD.
HOW DOES IT WORK
HOW TO CHANGE THE TEMPERATURE UNIT
USING THE DEVICE
Step 1
Turn on the thermometer.
Press and release the On / Memory button. The thermometer
displays the last measurement.
LCD SCREEN
1.
Temperature scanning in progress
Temperature display
Memory mode
Record numbers
Low battery indicator
2.
3.
4.
5.
Temperature unit
Communication symbol
Skin/Surface temperature
indicator
6.
7.
8.
8
7
1
2
5
6
4
3
RESULT INDICATORS
Message
What it means
Temperature measurement outside the displayed temperature range,
skin/surface scan temperature ranging from 71.6°F~111.2°F (22°C to 44°C),
is shown on the display with red LED.
Hi-temperature 111.3°F (44.1°C) Lo-temperature 71.5°F (21.9°C)
Your thermometer stores 10 recent readings in the memory.
Step 1
Be sure the
thermo-meter is OFF
before recalling this
memory.
Step 2
Press the On / Memory button to turn on the
thermometer.
RECALLING THE MEMORY
When the memory is full, the new result will overwrite the oldest one. When you find the
result on the display, press On / Memory button again to return to the first record.
Step 4
Exit the memory.
Press the Scan button and LCD will show latest results with flashing “ ” . Then press
On/Memory button again, and then the LCD will show “ OFF ” to exit memory.
Step 3
Press the On / Memory button for 3 seconds
to enter memory mode.
Each time you press the On / Memory button,
a result will be displayed in the order of dates
(latest result shown first), together with “ ”
and number ( from 1 to 10 ).
Step 2
Put the probe
perpendicularly to the
forehead.
Press and hold the Scan
button. Make sure the probe
is perpendicular to the
forehead, not at an angle.
Please make sure that the forehead is clean before taking a measurement.
If the probe is placed at an angle on the skin/surface scan, the reading will be
affected by surrounding temperature.
You can perform a forehead scan from 3 cm away.
Turn off the thermometer by pressing On / Memory button twice. Or leave for 3
minutes after a temperature measurement, the thermometer will automatically turn off.
If you need to take another reading, wait “ ” flashing before taking another
measurement.
NOTE
Step 3
Read the result.
Release the button
and read the
result. “ ” is
shown together
with a tempera-
ture value and
beeps.
311-1261500-XXX
Version 2.0 2020/04
APPEARANCE AND KEY FUNCTIONS
Operation Instructions
Forehead Thermometer
TD-1261
1.
Probe cover
Night light
On/Memory button
Manufacturing label
Battery cover
Probe lens
Scan button
Bluetooth indicator
2.
3.
4.
5.
6.
7.
8.
1
2
3
4
5
7
8
6
Step 1
Keep pressing
the scan button.
Step 2
Insert battery while scan
button is presed.
Step 3
Release the scan
button after you
see C (˚C) or F (˚F)
on screen.
Step 4
Reattach the battey cover.
On the thermometer
On the app
You can also change the temperature unit you will see on the app screen.
Open settings in the
Qardio App and select
‘set up your thermometer’.
Then simply select the
display unit and save.
You will then see ˚C or ˚F on the app screen as per your selection.
Temperature
36.5 ˚C
2020/11/2, 3:00 PM
Save
Celsius
Fahrenheit
Select display unit
Temperature
97.7 ˚F
2020/11/2, 3:00 PM
