1.4 Hard Drive Installation
The front of the unit contains a latch that opens the HD Storage when slid to the right side.
*
Slide the latch to the right side, and then open the HD Storage
.
*
Support of 2.5 inch HDD, SSD hard disk; Max capacity is 2TB.
*
Please do not remove Hard Disk while playing music.
Step 1
Step 2
Power on:
Press the
Power Switch
at the back of the unit, the LED indicator will turn blue.
Power off:
Press the
Standby Switch
button
on the front panel and
wait until the LED indicator
turned
off
, then press the
Power Switch
off.
Standby:
Press the
Standby Switch,
when the LED indicator turned off the system will go to
Standby mode. You can press it again to restart the system.
*
The QAT app also contains the function to switch off the unit remotely.
*
When the LED indicator is blinking means system is upgrading.
*
Please
DO NOT press the Power Switch off when the indicator is flickering or blue
, or it
will cause damage to the system .
2. Power on/off
Please refer to product overview 1.3
QAT RS3 Manual
Page 6
