7. Installation of the ceiling fan
1. Install the mounting Bracket by screw
(Fig.1)
2. Insert downrod over upper canopy (Fig 2 3)
3. Then, insert the cross pin over yoke and
Cotter pin(Fig4)
4. Remove the 2 screws from the rectangular
cover on the motor housing and remove the
plate,insert the blades through the slots
around the motor. Align the blade with the e
three holes,and secure the three screws
through the opening. Tighten all blade screw
evenly and get the rectangular cove secured
by screws (Fig 5)
5.
Connect the wire as the fig show (Fig 6)
6.
Insert the remote control into the mounting
bracket (fig 7)
P.6
