Example
:
Add and delete door
/
window sensor
4.4.5
Modify admin password. (Note: please refer to step 4.4, according to App prompts.)
4.4.6
Modify installation address.
(
Note: please refer to step 4.4,according to App prompts
)
4.4.7
More settings.
Items
WiFi network breakdown alert
GSM network breakdown alert
Functions
If WiFi network breakdown, host will push alert message.
If GSM network breakdown, App will push alert message.
1.Click to enter into the interface
of adding door/window sensor.
2.
Click the scan detection.
3.
Scan QR code on the back of the
sensors.
Door
/
window not closed alert
Accessories low battery alert
When arming, App will push alert message if door/window isn’t closed
properly.
If accessories in low battery, APP will push alert message.
Click here to delete all detectors.
Power breakdown alarm
If power breakdown or out of power, App will push alert message.
Click here to delete sensors one by one.
Enter a personalise name
for easily recognition.
6. All the accessories are added by
scanning QR code, simple and fast.
4.
Click ok
,
App will automatically
5.
Adding successfully.
recognize the door/window sensor.
4.4.4 Set phone number for SMS message and phone call. (Note: this function are special for
GSM edition. While WiFi network is not working, it will automatically switch to GSM network.)
Arm
/
disarm SMS alert
Siren prompt when arm/disarm
by remote controllers
The volume of internal siren
Delay arming time (s)
Delay alarm time (s)
Delay disarm time (s)
Siren alert time (s)
Timing arm
Timing disarm
Timing stay arm
NC/NO alarm for wired zones
GSM network alarm
Temperature alarm (
℃
)
Someone at home reminder
When arm or disarm the panel, whether sending SMS alert.
When arm or disarm by remote controllers, whether need siren prompt.
The Siren volume can be adjusted,High
/
Medium/Low for optional.
The arming delay time can be chose from 0~99 seconds, default is 30s.
Delay alarm time could be chose from 0~99 seconds, default is 0s.
Delay disarm time could be chose from 0~99 seconds, default is 0s.
Siren alert time could be chose from silent or 0~254s/keep alerting.
Default is 90s.
Three group of timing arm can be setup.
Three group of timing disarm can be setup.
Three group of timing stay arm (home stay) can be setup.
The alarm mode for wired zones: NC or NO, default is NC.
GSM Alarm function could be chose from Closed/Open/Auto Change.
Temperature alarm can be set from Closed or 0~120
℃
,
default alarm is 85
℃
.
Could set somebody at home reminder, the function default is closed
.
12
1.
Click into SMS and phone
call numbers setting interface.
2.
Click to set numbers, can setup
3 SMS and 3 phone call numbers
.
3.
After setting phone numbers,
click “ok” to finish settings.
13