38
11
Battery Connection
• Batteries can be replaced only by qualified personnel. If the battery needs to be
replaced, you must use a battery that meets the manufacturer’s specifications.
• You can install up to three batteries. The SOH (state of health) among battery
packs should be less than
xx
%. (Failing to comply with this provision may void the
warranty.)
11.1 BMS Communication Cable Conncetion
Use the BMS communication cable included in the product package.
500 ± 10
1
Connecting the BMS Communication Cables
Connect the BMS communication cables to communicate with or control the battery packs as
follows:
BMS IN
BMS IN
BMS OUT
BMS OUT
When connecting the BMS communication cable, check the protruding part of the cable terminal.
Make sure the cable aligns with the terminal and slots in without
resistance. Turn the sealing nut to tighten the connection.
