System Settings
56
15.5 Checking the Settings Informaton
Once settings are selected at commissioning, they are locked to view only.
To check the firmware version:
The firmware version can be found in the Information section on the initial page of Q.OMMAND.
The appropriate region and grid code must be selected because grid protection settings and power
quality response modes may vary by region.
To check the region or grid code setting:
1
Tap
on the top left corner.
2
Tap
Region & Time
in the
Settings
menu to check the region setting.
Tap
System
in the
Settings
menu to check the grid code setting.
Note
After commissioning, resetting all the settings can be performed only by an authorized installer.
