INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO ML-G11.X
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO ML-G11.X
18
19
4 Electrical connection
4.4 After installation
Ensure that all necessary safety and functional tests
have been carried out according to applicable
standards.
Note! Module damage may occur!
Ensure that the plug connections are secured away
from any water-channelling surface.
Integrate the system into the existing lightening
protection system in accordance with the applicable
local regulations.
Warning! Fire Risk!
Do not use light concentrators (e.g. mirrors or lenses).
Ensure that the cabling is not exposed and / or
hanging and is protected from dirt, moisture and
mechanical friction.
5 Grounding
Protective Grounding
The modules must be grounded in accordance with the local
statutory regulations.
6 Faults and defects
Danger!
Risk of fatal injury due to electric shock!
Do not attempt to fix any problems yourself (e.g., glass cracks,
damaged cables).
Please contact an installer or Qcells Technical Customer
Service Department.
7 Disposal
Do not disconnect modules by yourself.
Please contact an installer or Qcells Technical Customer
Service Department.
Dispose of modules in accordance with the local disposal
regulations.
