I
NSTALLING
H
ARDWARE
C
ONNECTING
A
F
IBER
-
OPTIC
C
ABLE
2-10
Figure 2-12.
Securing Device to a Pole Clamp
The device is now mounted to a pole.
Connecting a Fiber-optic Cable
The device supports fiber-optic network connections.
Requirements:
SFP module adapter
Small form-factor pluggable (SFP) transceiver module
SC or Duplex LC fiber-optic cables
Waterproof kit
The fiber-optic networking cable can be connected to the SFP port. The SFP transceiver
module connects the cable to the SFP port.
To connect the fiber-optic cable, follow this procedure:
1. Ensure all power sources are disconnected from the device.
2. Remove the plug cover the SFP port by using the following guidelines:
a. Place the device down on its bottom side on a clean work surface.
b. Hold the device down firmly in place and remove the plug cover from the SFP
port(s).
3. Position the gland body so it is right side up. The locking mechanism is positioned
on top.
CAUTION!
Ensure all power is disconnected from the system before proceeding.
!