QuantaMesh T7000 Series
17
Network Switch Installation Guide
Supported
Distance
Description
Note
Up to 10km
40GBASE-LR4 QSFP+ Transceiver Optic
(LC)
QSFP+
100GBASE-LR4 QSFP28 Transceiver Optic
(LC)
QSFP28
NOTE:
For more information about the cable/transceiver, please contact QCT sales.
QSFP28 Port Connection
The switch is equipped with 80 QSFP28 ports. Each single port supports 40G or 100G by
using 40G or 100G cables or optical transceivers. The switch can support fan-out cable
for 40G to 4 x 10G or 100G to 4 x 25G or 2 x 50G.
The QSFP28 ports are numbered and have corresponding QSFP28 port LEDs.
To install a QSFP28 module, do the following:
1
Slide the QSFP28 module into a QSFP28 port.
2
Push completely until the module locks into place.
3
Repeat the above procedures to install additional QSFP28 modules.
For more information about the QSFP28 port LED behavior when the network link is
established, refer to
”
.
Summary of Contents for QuantaMesh T7080-IXA
Page 1: ...QuantaMesh T7080 IXA Network Switch Installation Guide...
Page 2: ......
