SAFETY & REGULATORY INFORMATION
7
Network Switch Installation Guide
Circuit Overloading - Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits might
have on overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing this concern.
Reliable Earthing - Reliable earthing of rack-mounted equipment should be
maintained.
Particular attention should be given to supply connections other than direct
connections to the branch circuit (e.g. use of power strips).
Other Hazards
Battery Replacement
CAUTION
There is the danger of explosion if the battery is incorrectly replaced. When
replacing the battery, use only the battery recommended by the equipment
manufacturer.
Dispose of batteries according to local ordinances and regulations.
Do not attempt to recharge a battery.
Do not attempt to disassemble, puncture, or otherwise damage a battery.
Cooling and Airflow
CAUTION
Carefully route cables as directed to minimize airflow blockage and cooling
problems. For proper cooling and airflow, operate the system only with the
chassis covers installed. Operating the system without the covers in place can
damage system parts. To install the covers:
Check first to make sure you have not left loose tools or parts inside the
system.
Check that cables, add-in cards, and other components are properly
installed.
Attach the covers to the chassis according to the product instructions.
Laser Peripherals or Devices
CAUTION
To avoid risk of radiation exposure and/or personal injury:
Do not open the enclosure of any laser peripheral or device.
Laser peripherals or devices are not serviceable.
Return to the manufacturer for servicing.
Use certified Optical Fiber Transceiver Class 1 Laser Product.
Regulatory and Compliance Information
Electromagnetic Compatibility Notices
FCC Verification Statement (USA) 1.5.1.1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
Summary of Contents for QuantaMesh T7080-IXA
Page 1: ...QuantaMesh T7080 IXA Network Switch Installation Guide...
Page 2: ......
