Appendix
45
Manual for N2 series
figure-4 Backup process
2. Backup System Partition
It is used to backup the system partition of
current hard disk. It makes a backup of the
data in the bootable partition (actived partition)
of current hard disk, as well as the partition
table.
3. Backup Whole Disk
It makes a backup of all the useful data on the
hard disk, including partition table and the data
in all partitions.
4. Backup CMOS Setup
It is used to backup the settings you have
made in the CMOS Setup.
5. Release Backup Area
It is used to unload the backup data on the
hard disk, freeing the hard disk space.
6. Exit Backup Menu
It is used to Exit Backup Interface.
Press Recovery Hotkey to enter Recovery Interface duringthe POST(Power On Self Test),
then the follwing interface will appear. You can scroll the highlight bar to the option you want
to work with using arrow key. Press ENTER to confirm.
Recovery Function Introduction
It is used to backup partition table of current hard Disk. A partition table keeps the status of the
hard disk partitions, such as the number of partitions, the type and size of each partition, etc.
It is the most important information of the hard disk data structure. The incorrectness or loss
of the table will result in the failure of reading data from the hard disk partitions.
1. Backup Partition Table
N2en.p65
02-6-4, 16:53
45
Summary of Contents for N2
Page 10: ...This page is intentionally left blank 4 N2en p65 02 6 4 16 52 4...
Page 44: ...38 Manual for N2 series N2en p65 02 6 4 16 53 38...
Page 45: ...Appendix 39 Manual for N2 series N2en p65 02 6 4 16 53 39...
Page 64: ...58 Manual for N2 series DDR DIMM Configuration Matrix for IGP 128 N2en p65 02 6 4 16 54 58...