background image

Chapter 3

3 - 1

Chapter 3
AWARD BIOS Description

Entering BIOS Setup

Power on the computer, when the following message appears briefly at the
bottom of the screen during the POST (Power On Self Test), press <Del>
key or simultaneously press <Ctrl> + <Alt> + <Esc> keys.

Press <Del> to enter SETUP

Once you have entered the Award BIOS CMOS Setup Utility, the Main
Menu (Figure 1) will appear on the screen. The Main Menu allows you to
select from eleven setup functions and two exit choices. Use the arrow
keys to select among the items and press <Enter> to accept or enter the
sub-menu.

ROM PCI/ISA BIOS (2A59IQ1I)

CMOS SETUP UTILITY

AWARD SOFTWARE, INC.

STANDARD CMOS SETUP

INTEGRATED PERIPHERALS

SpeedEasy CPU SETUP

System Monitor SETUP *

BIOS FEATURES SETUP

PASSWORD SETTING

CHIPSET FEATURES SETUP

IDE HDD AUTO DETECTION

POWER MANAGEMENT SETUP

SAVE & EXIT SETUP

PNP/PCI CONFIGURATION

EXIT WITHOUT SAVING

LOAD SETUP DEFAULTS

Esc   :  Quit                                              

 

 

 

  :  Select Item

F10  :  Save & Exit Setup                          (Shift) F2   :  Change Color

Time, Date, Hard Disk Type...

Figure-1  Main Menu For BIOS Setup

*: This item is blank for without LM78 and LM75 on board.

Standard CMOS Setup

Summary of Contents for Pentium P5I430TX/IIB TITANIUM IIB






















































Reviews: