Chapter 3
3 - 9
Doze Mode
: Disabled
Secondary IDE 1
: Disabled
Standby Mode
: Disabled
Floppy Disk
: Disabled
Suspend Mode
: Disabled
Serial Port
: Enabled
HDD Power Down
: Disabled
Parallel Port
: Disabled
Throttle Duty Cycle
: 62.5%
VGA Active Monitor
: Disabled
Soft-Off by PWR-BTTN
: Instant-Off
ESC: Quit
↑↓→←
: Select Item
Resume by Ring
: Disabled
F1 : Help PU/PD/+/- : Modify
Resume by Alarm
: Disabled
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Defaults
IRQ8 Clock Event : Disabled
Figure-6 Power Management Setup Menu
The following pages indicates the options of each item and describe their
meaning.
Item
Option
Description
•
Power
Management
Disabled
User Define
Global Power Management (PM) will be disabled.
Users can configure their own Power
Management Timer.
Min Saving
Pre - defined timer values are used so that all
timers are in their MAX values.
Max Saving
Pre - defined timer values are used so that all
timers are in their MIN value.
•
PM Control
by APM
No
System BIOS will ignore APM when Power
Management is enabled.
Yes
System BIOS will wait for APM’s prompt before
it enters any PM mode e.g. Standby or Suspend.
Note: If APM is installed (choose "Yes"), and if there
is a task running, and the timer is time out, the APM
will not prompt the BIOS to put the system into any
power saving mode. But if APM is not installed
(choose "No"), this option has no effect.
•
Video Off
Method
Blank
Screen
The system BIOS will only blank off the screen
when disabling video.
V / H SYNC
+ Blank
In addition to Blank Screen, BIOS will also turn
off the V-SYNC & H - SYNC signals from VGA
cards to monitor.
DPMS
This function is enabled only for the VGA card
supporting DPMS.
Note: When the Green monitor detects the V/H-
SYNC signal, the electron gun will be turned off.
•
Video Off After
N/A
System BIOS will never turn off the screen.
Suspend
Screen off when system is in Suspend mode.
Standby
Screen off when system is in Standby mode.
