8
2C - Measurement of Over 2”
1. With the Magnet Lock still in the middle
position of the Mounting Plate from STEP 1 and
with the Perfect-Installation Tool still attached,
insert the Perfect-Installation Tool into the
RIGHT (B) slot of the SureCatch™ until it grips.
This will hold the Mounting Plate in the desired
position.
2. Slowly push the drawer in to verify that the
Mounting Plate hits on the
drawer front
. Then
open drawer again.
3. Remove the adhesive protective liner on the
Mounting Plate. Slowly push the drawer in until
the Mounting Plate touches the
drawer front.
Now reach in with your fingers and press firmly
on the Mounting Plate against the
drawer front
for at least 30 seconds.
4. Open drawer. Remove the Perfect-Installation
Tool.
You’re DONE!
For Cabinet Doors
1. Position the Mounting Plate vertically
against the edge of the door frame to
measure and mark for the position for the
DualCatch™ on the frame.
3
3
4
1
4
1
2
1
2
