10
4
Connecting the uPlay Stream
to your network
The uPlay Stream has a 10/100 Ethernet port and an 802.11 b/g/n
WiFi interface. Music can be streamed to the uPlay Stream via an
Ethernet cable or WiFi. Please note that both the Ethernet and
WiFi can be connected to the network at the same time. However,
when they are both connected, the Ethernet connection will have
priority over the WiFi connection and audio will be streamed over
Ethernet only.
4.1 By Ethernet
Please follow the below steps for setting up the uPlay Stream
with Ethernet connection:
1. Connect the uPlay Stream to the router using the supplied
Ethernet cable.
2. The LAN indicator on the rear panel of the uPlay Stream
will be turned on when the Ethernet connection is made
successfully.
4.2 WiFi setup using WPS
Please follow the steps below for setting up the uPlay Stream
WiFi connection using WPS function:
1. Press the
WPS
button or enable the WPS function on your
WiFi router. The router should enter WPS mode.
2. Press and hold the
WPS
button at the rear panel of the uPlay
Stream for 2 seconds and release the button.
3. The WiFi connection LED on the uPlay Stream will blink
slowly.
4. When the connection is successfully made, the WiFi
connection LED will turn on permanently.
LAN
WPS
2s
Summary of Contents for uPlay Stream
Page 35: ...www qed co uk Q14480 IS_r0...
