11
1.2.5 Test card
When the
Test card
is activated, the device displays one test pattern content by network interface supported by the device. It displays important
information to assist in the device configuration.
This is an example of test pattern content that is displayed when the
test card
is activated.
☛
The
*
star pictogram is showing the chosen identification method in the device. It can be
HOSTNAME
UUID
MAC
. In the example,
the star is showing the
MAC
identification method (default value).
☛
The
key pictogram
is showing the MAC address value associated to the Gekkota license key.
☛
The
up
STATE
is meaning that the network interface currently showed is alive. If the STATE is
down
, the network interface is not alive.
☛
When the test card is activated, the content of the App is not displayed. To play the App again, you must deactivate the
Test card
.
The
Test Card
can be deactivated by using the device configuration Web user interface.
If the CEC is activated on your screen, and the CEC pass-through feature is fully supported, the test card can be activated or deactivated thanks to the
screen remote control with the key combination [left, right, left, right] pressed in less than ten seconds.
1
2
3
4
5
Summary of Contents for DMB400
