11
1.3.2 Device fixture
The TAB10s device can be hung on the wall using a mounting bracket (supporting or not the POGO type interface).
◬
To know the device fixture height, refer to the legislation in force in your country, related to the accessibility to disabled persons of
establishments open to the public during their construction and of facilities open to the public during their development.
☛
The legislation in force in France, for example implies to install the top of the display at 130 cm (51,181 ") maximum far from the floor. For the
TAB10s device, add 2.4 cm (or 0,787 ") to this height to determine the maximum height of the top edge of the TAB10s device. For example, for the
France country, the top edge of the device should be (130 + 2.4) = 132.4 cm (52,125 ") far from the floor. So, to find the center of the hole of the
mounting bracket should be at 130 cm (51,18 ") - 8,5 cm (3.35 ") = 121,5 cm (47,83 ").
◬
The TAB10s device is designed to be installed in landscape mode only.
Summary of Contents for TAB10s
