background image

69

Some Apps consist in a couple of APK (

main

 part + 

UI

 part). This is an example when the 

 Qeedji PowerPoint publisher for media player 

 App is installed and properly

activated:

PowerPoint  Publisher

 (for the main part):

checkbox 

 Activated 

: checked,

PowerPoint  Publisher  UI

 (for the UI part):

checkbox 

 Activated 

: checked.

¹ 

In  case  an  App  is  partially  or  entirely  uninstalled,  meaning  removed  from  this  table  by  clicking  on  the 

 Uninstall the App 

  button,  the  App  cannot  run  anymore.  To  fix

the  problem,  the  App  must  be  reinstalled  or  the  App  content  must  be  published  again.  Then  the  device  must  reboot  once.

Apps restart

Any 

 activated 

 APK can be started or restarted.

For the 

 Apps 

 consisting in a couple of APK (

main

 part + 

UI

 part), only the main part of the App can be restarted.

Apps deactivation

 

All  the 

 Apps 

  supporting  the 

 autorestart 

 

 AOSP 

  feature  are  launched  automatically  after  a  device  boot-up,  but  only  one  of  them  can  be  visually  rendered  on

the  screen.  Given  that  the 

 AQS 

  operating  system  cannot  choose,  among  the 

 activated 

 

 Apps 

,  the  one  which  must  be  visually  rendered  on  the  screen,  and  given

that  device  resources  (CPU,  DDR,  video  decoder)  are  shared  between  the  APK  which  are  executed  at  the  same  time,  it  is  advised  to  keep  an  only  one 

 activated 

APK  at  a  time.

With the table of installed 

 Apps 

, it is easy, with the appropriate checkbox in the 

 Activated 

 column, to see the 

 Apps 

 that are activated and then voluntarily choose

to deactivate those that are temporarily not useful for your current need.

 

If  an 

 App 

  is  not  useful  at  all,  the  best  is  to  uninstall  it  with  the 

 Uninstall the App 

  button.

Some Apps consist in a couple of APK (

main

 part + 

UI

 part). When such an 

 App 

 needs to be deactivated, the both parts of the App must be deactivated.

Summary of Contents for TAB10s




















































































































Reviews: