106
7.4 Appendix: TFTP and DHCP server configuration
To use
TFTP configuration by script
, you need a
TFTP
¹ server with a
DHCP
server associated to it (code
66
option).
¹ Trivial File Transfer Protocol
The network interfaces of the TAB10s devices must be configured to obtain their IP address with the
DHCP
server.
The
TFTP configuration by script
downloading operation (specific or general) is done with the DHCP server (during the device booting). The Qeedji
device configures first its network parameters obtained by
DHCP
server, and then launches
TFTP
download.
◬
the installation phase is launched only when the script has never been downloaded before or if its content has been modified since the last
download (md5 check).
DHCP server configuration
The
DHCP
must be configured to be associated to
TFTP
server. For that, you need to use code 66 option (
TFTP
Server), using the IPv4 address value of
the
TFTP
server.
For example, for a
Microsoft DHCP server
, you need to define the option
Boot Server Host Name
and give the IPv4 address of the
TFTP server
. It can
be in
Extended option
and/or
Server Options
.
☛
The service must be restarted before the new parameters are fuly reflected.
TFTP server configuration
The configuration is depending on the software client used. In all cases, you need to:
get the directory URL that can be seen by
TFTP
clients ,
choose the
TFTP
security
None
,
keep the default port (
69
).
Here is an example of the
tftpd32
software with MS-Windows.
In this example, the server address is
192.168.1.15
and the exported directory is
D:/usr/tftp
.
Copy the Javascript configuration script in the exported directory of the
TFTP server
.
☛
It is recommended to have one
.js
configuration script per device by following the pattern
<MAC>
.js (e.g. 00021Cfe1215.js)
.
Summary of Contents for TAB10s
