manualshive.com logo in svg

QEM MDO P1P44F-010, Operator'S Manual

Introducing the QEM MDO P1P44F-010 Operator's Manual - your essential guide to unlocking the full potential of your QEM product. Our comprehensive manual is available for free download, providing you with step-by-step instructions and crucial information. Get the most out of your device, download your manual now at 88.208.23.73:8080.

Share
Download
background image

MDO_P1P44F-010: Operator Manual

3/55

2. General features

2.1 Description

The J1-P44-FB20 innstrument with the P1P44F-010 software, it's suitable for automating a machine type: “cutter for stone
processing”.

2.2 Workings

single cut
tile cutting
tilt cut 

1)

profiling
drawing profiles with Mini Cad inside
profile drawings with Cad on PC and importing on the instrument with “ Profile Importer 8” program with
USB or LAN key
table flattening

1)

 with parameters, you can define whether the inclined cut will be done with the tilt of the beam, or with the tilt of the disk

2.3 Options

the W table can be motorized or manual
the H-axis may or may not be there, if present it can be manual or motorized or only mechanical (without
encoder)

2.4 Features

The axes can be controlled with:

normal positioning
with the conclusion of the positioning with “pulse technique”, which allows you to achieve greater accuracy, if
mechanical inertia tended to make the positioning wrong.
If due to the mechanics and type of inverter, the final part of the positioning was incorrect, the tool to
overcome this problem, provides this functionality.
Typically, it is used on the Table or W-axis, on which very different weights can be loaded between
them…causing a NOT constant space of inertia .
Bridge lifting alarm: If the Z-axis were to happen, pressing down would lift the bridge, the limit switch installed
on the bridge and connected to the I67 input will activate the alarm.
Manage of X Y Z + W (Table rotation) axes + H (disk tilt).

The H encoder is connected to the J1-P44-FB20 instrument, while
the X Y Z-W encoders are connected to the RMC1S modules

Errors in the mechanics of the W and H axes can be corrected by providing no.8 linearization sectors.
There is a table in which you can set the maximum diameter and turns of the cutting disk.
Measuring and displaying the current of the cutting disc; the maximum current setting is allowed.

2.5 Executable working

Multiple Cut

Tile Cut

Tilted cut

Summary of Contents for MDO P1P44F-010


























































Reviews:

No comments

Related manuals for MDO P1P44F-010

Brands by name

Popular brands

Load more brands