– 1 –
TABLE OF CONTENTS
General safety instructions . . . . . . . . . . . . . . . . 1
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Electrical requirements . . . . . . . . . . . . . . . . . . . 3
Extension cords . . . . . . . . . . . . . . . . . . . . . . . . . . 3
California Proposition 65 . . . . . . . . . . . . . . . . . . 4
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Exploded parts diagram . . . . . . . . . . . . . . . . . . 11
GENERAL SAFETY
INSTRUCTIONS
READ THIS OWNER'S
MANUAL COMPLETELY AND MAkE
SURE YOU UNDERSTAND ALL OF IT'S
SAFETY GUIDELINES.
1 .
KEEp GuArdS In pLAcE
and in
working order .
2 .
rEmovE AdjuSTInG KEyS And
WrEnchES.
Before turning on the tile saw,
make sure the keys and adjusting wrenches
have been removed .
3 .
KEEp WorK ArEA cLEAn.
Cluttered areas
and benches invite accidents .
4 .
ALWAyS rEmAIn ALErT WhEn ThE SAW
IS In uSE.
Inattention on the part of the
operator may lead to serious injury .
5 .
don’T uSE In A dAnGErouS
EnvIronmEnT
. Don’t use power tools in
damp or wet locations or expose them to
rain . Keep work area well lit .
6 .
KEEp chILdrEn AWAy.
Anyone in the
cutting vicinity should remain at a safe
distance from work area .
7 .
mAKE WorKShop chILd-prooF
with
padlocks, master switches or by removing
starter keys .
8 .
uSE ThE rIGhT TooL.
Don’t use a tool or
attachment to do a job for which it was
not designed .
9 .
uSE ThE propEr EXTEnSIon cord.
Make sure your extension cord is in good
condition . When using an extension cord,
be sure to use one heavy enough to carry
the current your product will draw . An
undersized cord will cause a drop in line
voltage resulting in loss of power and
overheating . TABlE 1 (page 4) shows the
correct size to use depending on cord
length and nameplate ampere rating . If
in doubt, use the next heavier gauge . The
smaller the gauge number, the heavier
the cord .
10 .
don’T ForcE ThE TooL.
It has been
designed to operate at maximum safety and
performance levels .
11 .
do noT ForcE ThE mATErIAL bEInG cuT.
Always let the blade cut at its own speed .
12 .
WEAr propEr AppArEL.
Do not wear
loose clothing, neckties, rings, bracelets
or other jewelry which may get caught
in moving parts . Non-slip foot wear is
recommended . Wear protective hair
covering if you have long hair .
13 .
ALWAyS uSE SAFETy GLASSES.
Also use
face or dust mask for commercial cutting
operations . Everyday eyeglasses only have
impact-resistant lenses, they are NOT
safety glasses .
14 .
don’T ovErrEAch.
Keep proper footing
and balance at all times .
15 .
mAInTAIn TooLS WITh cArE.
Keep tools
clean and in good working condition for
maximum safety performance .
16 .
dISconnEcT SAW bEForE SErvIcInG
– when changing accessories, such as
blades, bits, cutters, etc .
POWER PRO
1 HP TILE SAW
OWNER’S MANUAL
