Page 4 of 8
Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
b) Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
e) Maintain power tools -check for misalignment or binding of moving parts, breakage or damage of
parts and any other condition that may affect the power tool’s operation. If damaged, have the power
tool repaired before use.
f) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Use of the power tool for operations
different from those intended could result in a hazardous situation.
Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
5. PRECAUTIONS ON USING DRYWALL SANDER
Attention!
You must abide by the following basic safety measures against electrical shocks, injuries and the
danger of fire when using electric tools. Read and abide by these instructions before you start to use any tools.
These instructions must be kept in a safe place.
-
Do not use damaged accessories - always check before use whether the accessories are damaged
or cracked. For example, to grinding pad, please check the support plate is not cracked.
-
Ensure everybody to be out of the machine’s rotation area and run the machine at maximum speed
for one minute, which can fully test the accessories.
-
Do not put down the machine until it has stopped
completely
.
-
Clean the exhaust port on your machine regularly.
-
When working, control the machine firmly with both hands to ensure safe operation.
-
When choosing sanding disc, please observe the manufacturer's specifications.
-
We recommend that you always wear industrial safety gloves, safety goggles & P2 respiratory mask
when working with the drywall sander & wearing close-fitting clothes is mandatory.
-
Always allow for reaction torque
6. HOW TO USE DRYWALL SANDER
Before setting up, repair or maintenance of the appliance you must always turn off the operating switch and pull
out the mains plug!
Before Initial Operation
- Check if the rated frequency of the mains supply corresponds to the details of the type place.
- Before using the tool, read the instruction book carefully.
