background image

32

 – 12|2017 – Subject to change. 

Speedkid2 2018

Appendix

Warranty terms

Qeridoo provides a two-year warranty commencing on the purchase date for plastic and 

cover parts, as well as for load-bearing components. This warranty covers only material and 

manufacturing faults arising on correctly used and maintained vehicles. In particular, the 

terms and instructions in the user manual that you received with your vehicle are definitive 

in this respect.
Under no circumstances shall Qeridoo be liable for material damage or injury 

attributable to improper assembly, the intentional alteration of components 

or the non-observance of warning and maintenance notices. Warranty claims 

for defects resulting from accidents or other external forces, and caused by 

premature wear due to frequent and intensive use are also normally excluded. 

 

Commercial use such as rental or use for competitive purposes is deemed improper use and 

is not covered by the warranty at all. 

This warranty applies solely to the first owner and is non-transferable. Verbal agreements, 

restrictions or reservations that go beyond the terms specified here have no bearing on the 

validity of this warranty. The warranty regulations pertaining to your region also apply.

Tip!

You can easily register a warranty case online (

http://service.qeridoo.de

) that guarantees 

you easy processing. 
With your complaint, please provide an exact description of the fault (if possible with 

photos) and a copy of the original purchase receipt. Please also state the vehicle’s serial 

number. You can find this on the label or on the frame rod assembly in the storage space.

Support information

Please contact us directly if you have any questions about our products:

Qeridoo GmbH

Industriepark Nord 100

URL:

www.qeridoo.de

Hotline

53567 Buchholz

Mail: 

info@qeridoo.de

+49 (0) 2683 9466577

Germany

Fax:

+49 (0) 2683 9451925

(Mon. – Fri.: 9 am – noon 

& 2 pm – 4 pm)

You can find our current 

list of dealers

 on the Internet at:  

http://haendlersuche.qeridoo.de

Summary of Contents for Speedkid2 2018





































Reviews: