20
– 12|2019 – Subject to change.
Sportrex 2020
Assembly
Caution!
Due to the construction of the coupler, slight wear and tear in the form of
scratches can occur at the connection between bicycle frame and coupler. This is
not a reason for a complaint.
Danger!
The axle nut must be tightened in order to assure sufficient clamping force.
Therefore, observe the assembly instructions for the hub and the manufacturer’s
torque specifications when tightening the axle nut.
Tip!
The provided universal coupler is suitable for mounting on the most rear-wheel
models. If it does not fit your bicycle, find a suitable adapter and special couplers
in our manuals on the following website:
www.qeridoo.de/kupplungsleitfaden
Danger!
Do not use a washer or similar at the connection between the bicycle frame and
coupler because this could negatively affect the stability of the connection.
Caution!
Do not use a tool which was previously in contact with conventional steel.
Smallest steel particles could be transferred that could lead to contact corrosion.
Installing the rear light
In trailer mode, a certified rear light must be used during poor visibility or darkness in accordance
with the Road Traffic Licensing Requirements.
»
Move the push handle to the highest position.
»
Mount the rear light above the left pipe clamp
of the pushing handle.
Tip!
Follow the attached manufacturer's information for the work of the rear light.
