32
– 02|2017 – Subject to change.
Sportrex
Sportrex
Subject to change. – 02|2017 –
33
Appendix
Appendix
Warranty terms
Qeridoo provides a two-year warranty commencing on the purchase date for plastic and
cover parts, as well as for load-bearing components. This warranty covers only material and
manufacturing faults arising on correctly used and maintained vehicles. In particular, the terms
and instructions in the user manual that you received with your vehicle are definitive in this
respect.
Under no circumstances shall Qeridoo be liable for material damage or injury attributable to
improper assembly, the intentional alteration of components or the non-observance of warning
and maintenance notices. Warranty claims for defects resulting from accidents or other external
forces, and caused by premature wear due to frequent and intensive use are also normally
excluded.
Commercial use such as rental or use for competitive purposes is deemed improper use and
is not covered by the warranty at all.
This warranty applies solely to the first owner and is non-transferable. Verbal agreements,
restrictions or reservations that go beyond the terms specified here have no bearing on the
validity of this warranty. The warranty regulations pertaining to your region also apply.
Tip!
To claim under the warranty, please contact our complaints management team directly
by e-mail:
garantie@qeridoo.de
With your complaint, please provide an exact description of the fault (if possible with
photos) and a copy of the original purchase receipt. Please also state the vehicle’s
serial number. You can find this on the label or on the frame rod assembly in the
storage space.
Support information
Please contact us directly if you have any questions about our products:
Qeridoo GmbH
Reutherstraße 3
URL:
www.qeridoo.de
Hotline
53773 Hennef (Sieg)
Mail:
info@qeridoo.de
+49 (0) 2242 9041233
Germany
Fax: +49 (0) 2242 9041247
(Mon. – Fri.: 9 am – noon & 2 pm
– 4 pm)
You can find our current
list of dealers
on the Internet at:
http://haendlersuche.qeridoo.de
Technical data
External dimensions
Sportrex1
Sportrex2
Length (without buggy wheel)
99 cm
99 cm
Length (with buggy wheel)
99 cm
99 cm
Length (with tow bar)
144 cm
144 cm
Width (external width from wheel to wheel)
75 cm
85 cm
Height (from ground to cabin roof)
90 cm
90 cm
Height of push handle (lowest / highest set
dimension)
74 cm / 107 cm
74 cm / 107 cm
Pack size of the collapsed cabin (L x W x H)
113 x 60 x 32 cm
113 x 72 x 32 cm
Internal dimensions
Sportrex1
Sportrex2
Seat width (max. width at shoulder height, across
both seats)
52 cm
62 cm
Seat height (max. height between seat and cabin roof) 72 cm
72 cm
Legroom (max. length between backrest and foot
rest)
55 cm
55 cm
Storage space behind the seats (L x W x H)
30 cm x 48 cm x 26 cm
(approx. 37 l)
33 cm x 56 cm x 26 cm
(approx. 43 l)
Weights
Sportrex1
Sportrex2
Cabin (incl. push handle)
10 kg
11.95 kg
1 x 20" wheel / 1x buggy wheel / 1x tow bar
1,5 kg / 1 kg / 0,63 kg
1,5 kg / 1 kg / 0,65 kg
Permitted total weight
45 kg
60 kg
Max. load (Trailer or Buggy & Walker mode)
25 kg
44 kg
Wheels
Sportrex1 & Sportrex2
Wheel
Type
20" spoked wheel, push-in axle
Tyres
20 x 2.0 (54-406)
Hose size
20", 20 – 50 mm wide
Valve type
Car valve (Schrader)
Air pressure
2.75 – 4.5 bar
Buggy wheel
Type
8,5"-wheel (pneumatic tyre)
Valve type
Car valve (Schrader)
Maximum air pressure
2 bar
Ambient conditions
Sportrex1 & Sportrex2
Storage location
Dry, ventilated, no direct sunlight
Temperature range for storage
-23 °C – 65 °C
