NO.5
NO.7
System connection diagram
NO.6
NO.4
8.DVD:
9.
10.
Press“LED”each time to change LED effects, LED1, LED2, LED3, LED4,
LED5, LED6, LEDF.
Turn volume off. Depress again to activate the sound.
12.BASS: To decrease/Increase the BASS by pressing.
13. : Play/pause in USB/BT mode, In FM mode long press for the full automatic
search.
14. : Play the next song by pressing “ ” at USB/BT input mode.
Choose next channel by pressing “ ” at FM input mode.
USB: USB reader mode selection.
16.FM: FM tuner mode selection.
17.Indicator light: If there is a button operation, the red light will flash one time.
To reset the system. All settings changes to default levels after reast.
0-9 NUMERIC KEYS: Can select songs directly in USB by pressing 0-9 keys.
i.e.: Can select song number 9 when you press number 9 in USB mode, number
0-9, can be used together. can select channels directly in FM mode by pressing
0-9 keys. i.e.: If you want to listen channel having frequency 94.2MHz. press
number 9 4 2 and soon will play 94.2MHz channel.
LED:
11.MUTE:
15.
7.BT: Bluetooth reader mode selection. When you enter Bluetooth input mode, LED
display right bottom start to flashing (2 seconds) to search the Bluetooth device.
Turn on your mobile Bluetooth device and search the device name “ BT SPEAKER ” ,
paired them well. When you have successfully paired your mobile to the speaker
system, the LED right bottom stop flashing. When start to play your mobile music,
the LED flashed every one second.The functions as "PREVIOUS/NEXT" , "PLAY/
PAUSE" , can operate via the front panel. On BT mode, when connecting with
mobile, press “ ” for 3 seconds, bluetooth function can be force-disconnected.
1. : Power or standby modes.
2.TREBLE: Adjust the treble volume by /-at the rage of -6dB+6dB.
3.VOL- : means you can increase volume.
Play the previous song by pressing “ ” at USB/BT input mode.
Choose previous channel by pressing “ ” at FM input mode.
VOL- : To decrease the volume.
AUX: AUX input mode selection.
4. :
5.
6.
the 2 speakers
(1)
(2)
(2)
(3)
(4)
1.
2.Input
Connect to sound sources
such as computer, CD
player, Mp3, etc.
ANTENNA
3.Output
Connect the satellite speakers.
4.LIGHT
Control shiny light
effect of speaker.
*if the remote control cannot function, it is because the battery of
remote control has been used up. thank you.
