154*295
O
FX.
WARNING
IMPORTANT SAFETY MEASURES
Before using this machine, please read all the safety and operating instructions. These safety
and operating instructions should be kepi in condition of consultation.
呜噤名已
1. Electric Power Supply Line: Keep the power cord safe from being trampled on,
pressed on by heavy objects, or pierced. Make sure that the cord has ample space to rest on the
ground and is not stressed. DO NOT pull or drag or the power supply line.
2. Ventilation: This unit must be set in a ventilated space. DO NOT cover the vents on the back panel
for any reason. If placed alongside a wall, distance the unit a minimum of 1 Dem to allow air
flow. DO NOT surface that might restricted good air flow
3. Dtsmantllng: DO NOT dismantle or open the unit. This is a high-powered unit that can cause
se的us hann计tampered with. DO NOT Open.
4. Smoke: Please unplug the power supplies cord from the wall outlet immediately ff unusual smoke
appears and contact customer support.
5. Please make sure the voltage switch inside battery compartment is set to the AC voltage of the
country you are using the stereo
�
心
WARNING!
&
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS
SPEAKER THERE ARE NO USER-SERVICEABLE PARTS INSIDE REFER ALL SERVICING
TO A QUALIFIED TECHNICIAN
To prevent fire or electnc shock, do not expose this equipment to ram or moisture. Do not store or
operate this product near any liquids, heat sources such as radiators, heat registers or under
extreme weather cond1t1ons. Clean only with a dry cloth
Users should exh心t extra safety when the WARNING or CAUTION symbol appears 1n this
instruction manual and follow all precautions as they are stated
OFX
Follow Us
CD@@@@®
O
FX.
BASIC OPERATION
AC Operation
1. Before connecting the unit to an AC outlet, check the operating VOLTAGE of the unit 1s
1dent1cal with the VOLTAGE of your local power supply
2. Connect the supplied AC power cord to the AC socket at the back of unit
3. The battery will be automatically disconnected when the AC Power cord 1s plugged into
the socket
Battery Operation
Unplug the AC cord from AC Jack. This umt requires UM IX4 (not included), open battery
insert the battenes 1n the battery compartment at the downside of the umt, be careful of
pos的n according to the notes. Close the battery cover
Battery Operation
1. Select required band (FM/AM/SW1-SW2) with BAND selector
2. Select desired station by rotating the TUNING control
3. The bu仆t-in antenna is directional. When receiving FM or SW-1-SW-2 broadcast, pull
out the telescopic antenna in full length; the strongest reception can be achieved by
rotating and searching for the strongest signal
4. Adjust VOLUME control to your listening preference
5. To turn off the radio, set the function selector to TAPE (OFF) button. Listen with
headphones (not 1ncluded).\For private listening, you can use headphones with the unit
Connect the headphones (not included) to the headphone jack at the side of the unit. The
sound from the speakers automatically turn off when headphones are connected to the
unit
Playback Operation
Cassette Play
1. Set the function selector to the TAPE position
2. Press the STOP/EJECT button to open the cassette door Insert the cassette so the
open side faces up. Close the cassette door.
3. Use the following buttons and controls for cassette play
PLAY
•Press Play to begin playing the cassette tape
F.FWD
•Press to rapidly advance the cassette tape forward
REWIND
·Press to rapidly rewind the cassette tape back
STOP
·Stop playing or release the F.FWD and REW button
ALJTO STOP:
•Cassette tape w小automatically stop when it reaches the end
PAUSE
•Press to stop playing or recording. The use of the PAUSE button does not disturb the
setting for either play or record. This function should be used for a temporary stop. It 1s
best to use the pause button when recording. Press PAUSE again to resume playing
back or recording.
VOLUME CONTROL
·Slide the control to the right to increase the volume. Slide the control to the left to
decrease the volume
O
FX.
BASIC OPERATION
Directly Recording from the Radio
1. Set the function selector to the radio pas仆10n
2. Turn ON the radio station you want to record
3. Insert a blank cassette into the tape compartment
4. Press the Record and Play button to begin recording
5. Press the Stop button to end the recording or press the pause button to pause the
recording.
Care and Maintenance
To ensure optimum performance from your unit, keep the tape 1ns1de clean. To clean the
tape path, open the cassette door Moisten a cotton swab with 1sopropyl alcohol or special
tape head cleaning fluid. Remove any excess alcohol from the swab. Clean the tape head,
capstan and pinch roller. Avoid scratching the head surface To clean the unit housing, use
a soft damp cloth. After cleaning, wipe the unit surface with a dry cloth
CAUTION·Never use chemicals such as benzene or paint thinner for cleaning
二
一
一二
歹
了专
二
-I
Keep magnets and metallic objects away from the tape head. If the head becomes
magnetized, noise will increase and the volume tone will deteriorate and poss心y cause
damage
TROUBLESHOOTING
If the Cassette tape fails to move, you get poor reception, or fluctuating volume, try
replacing the batteries or connect the unit to a power source
Radio to Tape Recording
1. Set the function selector to the radio position
2. Turn ON the radio station you want to record
3. Insert a blank cassette into the tape compartment
4. Press the Record and Play button to begin recording
5. Press the Stop button to end the recording or press the pause button to pause the
Tape to .mp3 Recording
Set the function switch to TAPE and insert your music cassette tape. Insert a USB or SD
Card and wait for the REC/MP3 light to turn on and the press the REC button. Press play
on the cassette tape to begin the .mp3 conversion. The J-220BT converts at a resolution
of 128Kbps
Bu1ld-1n M,c Recording
Set the function switch to USB and insert your blank USB or SD Card Wait for the
REC/MP3 light to turn on and then press the REC button Begin talking to record to from
the Bu1ld-1n m1c The J-220BT converts at a resolution of 128Kbps. Press and hold the
REC/DEL button to erase the current loaded track
Bluetooth to Tape Recording
Set the function switch to MP3/BT position and insert your blank cassette tape. After
hearing the Bluetooth prompting sound, open the Bluetooth settings on your mobile device
to search the FP-BT. Select the option to connect. You will then hear a sound and see a
light flash. Select music from your favorite music app and then press the Record and Play
buttons on the tape deck to begin the transfer.
