HEIGHT OF CUT
The machine has been supplied with three cutting heights from 20-40-60 mm.
1.
Adjusting the height of cut should only be undertaken when the motor is off, and the
electrical plug removed from the power source and the blade has come to a complete
standstill.
2.
To adjust the cutting height, move front and rear axles up and down the height gauge.
3.
Ensure both axles are located at the same cutting height, to ensure an even cut.
13
Summary of Contents for QG33-1200
Page 18: ...PARTS DIAGRAM QG33 1200 1938281001...
Page 23: ......