TROUBLE SHOOTING
WARNING!
Only perform the steps described in these instructions!
All further inspection, maintenance and repair work must be performed by an authorised
service specialist!
Contact your local authorised service dealer if the problem cannot be solved by yourself!
WARNING!
If the product does not perform properly, makes unusual sounds, the motor does not start or
stop as described, the cutting device does not work properly, or any other irregularity or
malfunction occurs, do not attempt to repair the product by yourself.
PROBLEM
POSSIBLE CAUSES
REMEDIAL ACTION
Motor does not start
No power supply
Check fuse / extension lead.
Machine cable defective
Contact Approved Service Dealer.
Blade jammed
Clean exit chute: the blade must rotate
freely. Start on low grass or on the
section of lawn that has already been
mown; correct the cutting height.
Loss of motor
performance
Too much grass in the exit
chute.
Clean exit chute: the blade must rotate
freely. Start on low grass or on the
section of lawn that has already been
mown; correct the cutting height.
Blade blunt
Contact Approved Service Dealer and
have the blade sharpened/replaced.
Grass collection box
does not fill up
sufficiently
Lawn wet
Allow the lawn to dry.
Grass collection box
clogged
Clean the vents grass collector.
Too much grass in exit
chute channel
Clean exit chute. Correct the cutting
height
Blade blunt
Contact Approved Service Dealer and
have the blade sharpened/replaced.
Summary of Contents for QG33-1200
Page 18: ...PARTS DIAGRAM QG33 1200 1938281001...
Page 23: ......