QIAreach eHub User Manual 10/2020
21
5.2
Running a test on the QIAreach eHub
Important
: The steps described in this section are general test workflow cues provided on the
QIAreach eHub visual display screen. Refer to the applicable QIAreach test Instructions for Use for
instructions on performing a test with the QIAreach eHub.
Note
: Each of the connection ports on the QIAreach eHub operates separately. Up to eight (8)
QIAreach tests can be run simultaneously.
1.
When a QIAreach test eStick has been inserted in a QIAreach eHub connection port, the self-
test icon will be displayed while the eStick performs a self-test.
Figure 7. Self-test screen display.
2.
Once the eStick self-test has successfully completed, the “Add sample” icon will be displayed,
signifying the eStick is ready for sample addition.
Figure 8. Add sample screen display.
3.
After the test sample has been added to the eStick, the “Processing” icon will be displayed
along with a test countdown timer.
Note
: Sample detection may take up to one minute.
Important
: The eStick must not be removed from the QIAreach eHub until the test has been
completed
.
Figure 9. Processing screen display and countdown timer.
4.
Once the QIAreach test is completed, the test result will be displayed on the screen and the
QIAreach test eStick can be safely removed.
