6
EN
Installation
1.
The appliance is for indoor use only.
2.
This appliance is not designed for built in.
3.
The venting openings must not be obstructed by
carpet.
4.
The washing machine must not be installed in
bathrooms or very wet rooms or rooms containing
explosive or caustic gases.
5.
Models with a single inlet valve should be connected
to the cold water supply. Models with double inlet valves
should be correctly connected to the hot water and cold
water supply.
6.
The mains plug must be accessible after installation.
7.
To prevent damage to the product, remove all
packaging and transport bolts before use.
8.
This product is for home use only and is only designed
for machine-washable textiles.
9.
Do not climb up and sit on top of the machine.
10. Do not lean against the machine door.
11.
Handling precautions:
12.
Transport bolts must be reinstalled by a technician.
13.
Accumulated water must be drained out of the
machine.
14.
Handle the machine carefully. Never hold any
protruding parts of the machine while lifting. Do not use
the machine door as a handle when moving the appliance.
15.
This appliance is heavy. Exercise care during
transport.
16.
Do not close the door with excessive force. If it is
difficult to close the door, check if the clothes are fully
inserted into the drum and evenly distributed.
17.
Do not use the machine to wash carpets.
18.
The washing machine must be calibrated before use.
19.
Before washing clothes for the first time, the washing
machine should be run for one full cycle with no clothes
