OLED Screen
Function key: Press this key to wake up/activate the lock
Fingerprint scanner: Used to capture or match fingerprints. When the fingerprint scanner is active, it will turn blue
in colour.
Emergency power supply: if the battery power runs out, the emergency power connector can be used to provide
access
The Fingerprint lock is classified into three user levels:
1)
Main-admin’s FP: refer to users who have access to all system functions and modify all settings
2)
Admin’s FP: refer to user who have access to unlocking or delete the user FP
3)
User’s FP: only have access to the fingerprint matching and unlocking functions
Operating Instructions
Register a Main-Admin FP:
A.
Press the function key ,the OLED display show” Register a Main-Admin’s FP”
B.
Place your finger onto the scanner, then display shows “ repeat”
C.
Repeat the above operation, display shows ”successful”
Register an Admin’s FP:
D.
When display show” Register a Admin’s FP”
E.
Place your finger onto the scanner, then display shows “repeat”
F.
Repeat the above operation, display shows ”successful”
Note: One lock is available for 2 Admin’s FP
Register a user’s FP:
G.
Press the function key ,the OLED display shows” Register a user’s FP”
H.
Place your finger onto the scanner, then display shows “repeat”
I.
Repeat the above operation, display shows ”successful”
Delete the 1
st
admin’s FP
A.
Press function key 3 seconds, verify the Main admin’s FP
B.
Select the program“delete the 1
st
admin’s FP”by function key
C.
Press function key 3 seconds again,display shows ”suceessful”
Delete the 2
nd
admin’s FP
D.
Press function key 3 seconds, verify the Main admin’s FP
E.
Select the program“delete the 2
nd
admin’s FP ”by function key
F.
Press function key 3 seconds again,display shows”suceessful”
Delete the user’s FP
G.
Press function key 3 seconds, verify the Main admin’s FP
H.
Select the program “delete the user’s FP” by function key
I.
Press function key 3 seconds again,display shows”suceessful”
Select the most appropriate function for the application
:
A) Private Use or B) Public Use
A)
Private Use
Note: this is the default function and is already pre-programmed in new lock. This is the most common function
and is used where the same fingerprint will be repeatedly used.
Press function key and reset pin at the same time ,select Private mode upon display prompt
www.qilocks.com sales@qilocks.com +44 (0)20 8906 6881
