B)
Public Use
This function is used for short term, multi occupancy application. The fingerprint is only used one time
Press function key and reset pin at the same time ,select Public mode upon display prompt
Note: the red light will flash every 2 seconds ,
Reset lock
A. Press function key to wake up
B. Remove the battery cover, insert the pin to the reset hole ,then press the pin 3 seconds,until display show”Init
Complete” reset successfully
Additional Function
1. Emergency Unlock Function
--Unlock from emergency power if lock without power or low power
--Unlock by main-admin’s FP or admin’s FP
2. Low voltage alarm Function
--The lock will alarm if the voltage lower ,the red light flash and the display will
show “please ch
ange battery”
3. The setting will be exited automatically
when no action is carried out,and lock in sleep mode
Changing the Battery
1.
Remove the screw in the battery cover
2.
Take off the battery cover
3.
Take out the batteries
4.
Put in the new batteries and screw cover plate in place
www.qilocks.com sales@qilocks.com +44 (0)20 8906 6881
