Operating Instructions
The lock has a 10 button keypad , a
C
button and an OK button.
The lock has three code levels that allow you to perform the following actions:
1)
Master code:
Open the lock; Change the master code; Set/Change/Delete the sub-master and user code;
Select between Private and Public functions, Activate/deactivate technician code
2)
Sub-master code:
Open the lock; Change the sub-master code; Set/Change/Delete the user code;
3)
User code:
Open the lock; Change the user code
4)
Technician code: open the lock
Default Settings
Master code = 99551133 (8 digit code) User code =1111 (4 digit code)
Private Mode
Functions
Before programming, select the most appropriate function for the application:
A)
Private Mode or B) Public Mode
Private Mode
Note: this is the default function and is already pre-programmed into each lock. This is the most
common mode and is used where the same code will be repeatedly used.
To set to Private Mode:
C
- - 11 - -OK- - Master code - -OK
Example:
C
- - 11 - -OK- - 99551133 - -OK
Result: The lock will revert back to default Private Mode, factory set user code 1111 will now
work until reprogrammed.
Public Use
This function is used for short term, multi user applications. The code is only used one time
To set to Public Mode:
C
-- 22 - -OK- - Master code - -OK
Result: the lock will now remain open until next user enters their own code into the lock as
follow:
Step 1: enter new user code -- OK Close the locker which will now be locked
Step 2:
enter user code -- The lock will now remain open until next 4 digit code is entered
Note: when locked in public mode the blue light will flash every 2 seconds to indicate the locker is
in use
