background image

9

 

UM Assembly Palletiser HR7 (partly completed) QS203263 v1.0

 EN

 

Introduction 

 

 

 

1.5  Warranty 

Qimarox guarantees the machine from the delivery date. 

Please refer to the provisions as mentioned in the order confirmation of this order for the spe-
cific warranty terms. 

The warranty applies only if the machine is used in accordance with the specifications men-
tioned and if the operating and maintenance instructions are followed. 

The warranty of the machinery is no longer valid in the event of: 

• 

Improper use. 

• 

Insufficient maintenance. 

• 

Incompetent maintenance. 

• 

Modifications to the machine without the prior permission of the manufacturer. The war-

ranty does not apply to machine parts that need to be replaced periodically. 

1.6  Liability 

The manufacturer of the machine is not liable for unsafe situations, accidents and damage re-
sulting from: 

• 

Ignoring warnings or instructions as displayed on the machine or in this manual. 

• 

Usage of the machine for other applications, or under different conditions than indicated 
in this manual. 

• 

Making changes to the machine of any kind. This also includes the use of other replace-
ment parts. 

• 

Insufficient maintenance. 

The manufacturer is not liable for consequential damages in case of failure of the machine, 
such as product damage, business interruption, loss of production, and so on. 

Summary of Contents for HR9




































Reviews: