English
2
Using the Lamp
Turning on/off lamp power
Turning on/off individual lamp unit
Maintenance and Troubleshooting
Cleaning the Lamp
Turn off the lamp first, and unplug the lamp from the power outlet. Wipe any smears or dusts
off the lamp's outer casing using a soft, lint-free cloth lightly moistened with a mild detergent
solvent. Do not use alcohol or any other chemical solvents like kerosene, naphtha and so on,
as the lamp's casing may become damaged.
Cleaning the Wiring
• Turn off the lamp first, and unplug the lamp from the power outlet. Wipe the lamp's wiring
clean using a soft, lint-free cloth lightly moistened with a mild detergent solvent. Never use
a wet cloth, as it may cause an electric shock.
• Do not rinse the lamp or any of its components directly with water.
Troubleshooting
If you encounter problems when using the lamp, check the following:
(1) Are there loose connections between the lamp, power cord, power adapter, or the
power outlet?
(2) Is the power switch turned on?
(3) Is each lamp unit turned on?
If the problem persists, please contact the original place of purchase for help.
Specifications
You can use the power switch to turn the lamp power on or off.
With the lamp power turned on, you can turn
individual lamp unit on or off.
• Gently turn the lamp unit all the way to the left
or right until it is stopped by the lamp's internal
mechanism (the OFF position) to turn it off.
• To turn the lamp unit back on, gently turn the
lamp unit to the left or right from the OFF
position.
• Never apply excess force to each lamp unit.
• Never turn the lamp units at an angle over
120 degrees.
• The lamp units are NOT designed for 360-
degree rotation.
ON
OFF
OFF
120
Model
RF10 _F
DC power input
15V, 2.4A
Max. power consumption
28W
Operating temperature
0 C - 40 C
Dimensions (lamp only)
493 x 422 x 1618 mm (W x D x H)
www.QisDesign.com
Coral_reef.book Page 2 Tuesday, December 21, 2010 5:43 PM
